automatic screw tighten machine with robot arm for electrical appliances assembly

Auto screw nut locking robot description:

3)Automatic screw feeding device subvert the working principle of traditional screw feeding
device by abandoning the vibration plate and pusher. It carries forward the advantages
and overcomes the disadvantages of traditional screw feeding device, making it portable,
safe, stable and fast with low noise and low energy consumption.

4) Auto screw locking machine is easy to operate:the traditional manual take aim screws and screw
holes need to take up a lot of time and energy, and equipments are constantly placed just artifacts;

5)Automatic screw fasten lockong robot with the intelligent: PLC intelligent control circuits,
configure the touchscreen, the production data at a glance;

6)The screw tightening machine with high standards: lock pay process by equipment according
to the program itself completely, avoid the ill effects of artificial wrong operation; Lock pay cycle is short,
the equipment can be embedded line body achieve streamline operations.

7)With stable performance: equipment imported raw materials, equipment, production of high
efficiency, low failure rate, good guarantee product quality, to ensure that equipment zero fault.
 

Application:

1. Scope of applicative screws: M2- M6
 

2. Scope of applicative screw heads: for any universal type such as straight slot, cross, triangle groove,
trox, hexagonal, H head, etc.
 

3. Surface Treatment of screw: electrolytic nickel plating, color zinc plating, white zinc plating, and copper
plating, etc.
 

4. Screw materials: iron, copper, stainless steel, etc.
 

5. Materials of products to be screwed: plastic, iron, aluminum, etc.
 

6. Applicative Industries: mobile photo, hard disk, keyboard, toy, LCD/LED modules, communication
equipment, electrical appliances, auto parts and so on.

Automatic Screw Locking Robot Use Method:

1. Open the power, through air, adjust good torque and pressure;

2. The screw into the screw in the bin, screw amount to not more than screw conveyor altitude advisable;

3. Check if dial the code switch corresponding product model;

4. Before the first lock screw, need to check all the electricity of whether there is a grain of screw to lock
inside the clamp mouth;

5. If there is no grain of screw to lock on electric group of clamp mouth and need to press the test button,
the machine movement twice, ensure that electric batch of clip mouth there is a grain of screw batch of
clamp mouth waiting to lock in electricity;

6. Check whether feeder vibrator switch at the specified position;

7. Check finished, press the reset switch, to start production.
 

The better price please sent the email to :

jasonzhang@pcbasc.com