- PCB separator
- hektor separator/PCB hektor/off-out V-cut separator
- PCB Loaders
- PCB Unloaders
- PCB Conveyors
- PCB Outfeed Conveyor|PCB belt conveyor
- Infeed Conveyor
- AGV car/Guided transfer robot/load efficient/magnetic navigat
- PCB magazine loader
- PCB Buffers
- Auto Screw Fastening Robot
- Traffic Control Conveyors
- PCB depaneling machine
- Wave Soldering
- Lead Free Reflow Oven
- PCB grooving machine
- solder dross separator
Product Description
Please click the video here:ASCEN PCB separator depaneling multi PCBs online , you will know the PCB cutting machine how to operate on SMT assembly line.
pcb separator Features:
1.This PCB cutting machine with 2 cutting module and 3 cutting module optional via the PCB board material.The whole cutting process is divided into 2 or 3 stages. The stress of the cutting process can be reduced by 80% than the traditional one-cut process for the small cutting quantity each time. And the edges of the board are quite smooth and won’t bend and twist after cutting.
2.Unique bar design, can quickly separating the edge of the LED board, for the development of LED aluminum substrate, also suitable for other long LED panel and the PCBA processing.
3. Can be cut 10 PCB s at same time V cut lines are not deformed and fast speed(can be customized according to our customers’ requirement);
4.Each up and down with 1 blade , standard 9 group at the same time cutting ,I improve efficiency;
5.Each machine face and back with a conveyor and could freedom to adjust altitude ,easy to operate;
6.Minimize the internal stress generated when cutting the board to avoid cracking;
7. Suitable for all PCBs with V-CUT;
8.Up and down round knife can be adjusted accurately and can be repeated over and over again.
If you want know more solution about the SMT assembly process,please go to the web: www.ascen.ltd or sent us the email: info@ascen.ltd
pcb separator technical parameters:
Item | Scope of application |
Model number (PCB separator) |
ASC-900N |
Dimensions(L*W*H) | 2160*570*1050mm |
Cutting speed | 200-400mm/s |
Power | 500W |
PCB Board thickness | 0.2-3mm |
Maximum PCB board length | Unlimited |
Maximum cutting width | 280mm |
Minimum cutting width | 8mm |
Minimum cutting length | 250mm |
Working temperature | 10-35 degree |
PCB maximum component height | 15mm |
Power Supply | 1P AC220V 50Hz or 110V/60Hz |
Weight | Approx.382Kg |
Note:
|