PRODUCTS
- PCB separator
- hektor separator/PCB hektor/off-out V-cut separator
- Auto Screw Fastening Robot
- PCB Loaders
- PCB Unloaders
- PCB Conveyors
- PCB Outfeed Conveyor|PCB belt conveyor
- Infeed Conveyor
- AGV car/Guided transfer robot/load efficient/magnetic navigat
- PCB Buffers
- Traffic Control Conveyors
- PCB grooving machine
- Wave Soldering
- Lead Free Reflow Oven
- PCB depaneling machine
- PCB magazine loader
SOLUTIONS
CONTACT US
NEW PRODUCTS
NEW PRODUCTS
Product Description
Application:
The PCB NG/OK Unloader (PCB single Magazine Unloader) is connected to the back of AOI/SPI and has horizontal movement and go-through functions. The OK and NG PCB after being tested by AOI/SPI can be separated and sent to the PCB magazine rack, so that the PCB can be protected better and achieve the intelligent processing.
Features:
* Omron /Mitsubishi PLC intelligent control system with LED touch screen control, easy to operate.
* Swift and smooth retraction/extension of conveyor (frequency inverter controller).
* Magazine NG OK PCB unloader has the following features: sound-light alarm when fault occurs, automatic fault diagnosis.
* Connecting AOI or ICT/SPI allow distinguish good PCBs from NG PCBs by signal.
* Good and defective PCBs can be stored separated automatically with PCB magazine rack.
* The upper and lower air clamps ensure the location of the material box accurately
* The top safety caps can be opened for machine hardware maintenance and ensure the highest security level
* With ESD belt for PCB belt conveyor of PCB NG OK magazine rack unloader.
* With stable width adjustment device (manual screw control or width automatic adjustment selectable ).
* CE certified
Item | Scope of application | ||||
Model number | HY-250 OK/NG ULD | HY-330 OK/NG ULD | HY-390 OK/NG ULD | ||
Dimensions(L*W*H) | 1510*1500*1200 | 1580*1580*1200 | 1600*1650*1200 | ||
PCB Width | (50*50)-(350*250mm) | (50*50)-(455*330mm) | (50*50)-(530*390mm) | ||
Magazine size | 355*320*565mm | 460*400*565mm | 535*460*565mm | ||
Conveyor Height | 900+/-20mm(or customized) | ||||
PCB Direction | L-R(R-L) | ||||
Magazine Qty. | Up 1 and down 1 | ||||
Magazine change time | About 30s | ||||
Belt size | ESD 7mm flat belt | ||||
Power Consumption | 0.6KW | ||||
Air press and flow rate | 4-6 bar, MAX10L/minute | ||||
Power Supply | 1P AC220V 50/60HZ or customized available | ||||
Control method | LCD screen+PLC | ||||
PCB thickness | =/>0.4mm | ||||
Communication Plug | SMEMA Signal Plug for up/down line Double-wire cable | ||||
Weight | Approx.210Kg | Approx.260Kg | Approx.300Kg | ||
Note: 1. We can customized the SPI/AOI PCB NG ok unloader with bigger PCB board size. 2. We can optional add extra magazine rack capacity. |